How to port forward a Unturned server
Unturned takes three consecutive UDP ports: the one you configure and the two above it. All three must be open — the game claims the block rather than the single port.
Your setup
Pick the firmware family, not the exact model — the menus are identical across a range.
Default is 27015. If you changed it, it is the value of Port in Config.json.
The private address of the machine running the server — ipconfig on Windows, ip addr on Linux. It starts with 192.168, 10. or 172.
Open these
This firmware accepts ranges, so each line below is a single rule.
- 27015-27017 UDP
27015UDPGame trafficPort.27016UDPQueryUnturned takes the two ports above the one you set. All three must be open.27017UDPSteamThe third of the block.
Do not open these
This game has no remote-administration port to get wrong. Forward only what is listed on the left and nothing else.
Step by step: your router
- 1
Give the server a fixed local IP
A forward points at one address. If the server picks up a different one after a reboot, the rule silently starts pointing at nothing — this is why forwards "stop working" on their own.
On this router:look for DHCP Reservation, Address Reservation, Static Lease or Manually Assigned IP
- 2
Open the router admin page
Try these addresses in a browser on the same network:
- 192.168.0.1
- 192.168.1.1
- 192.168.2.1
- 10.0.0.1
Almost always printed on a sticker on the router itself.
- 3
Find the port forwarding page
Port Forwarding, Virtual Server, NAT, Applications & Gaming, or Port Mapping
Vendors use at least six names for the same feature. Whatever it is called, the page you want is the one asking for a port, a protocol and a device on your network. If the external and internal port fields both exist, set them to the same number.
- 4
Create one rule per line
a description field, if there is one External / WAN / Public / Service port Internal / LAN / Private port Protocol Internal IP / Device / Server IP Unturned 27015-27017 27015-27017 UDP your server’s local IP External and internal port are the same number here. Changing the external port is possible, but then everyone connects on the new one, so keep them matched unless you have a reason.
- 5
Let the server through its own firewall
The router now sends traffic to the machine, and the machine can still refuse it. Windows Defender Firewall in particular blocks a freshly installed dedicated server by default, which looks exactly like a failed forward.
Take it with you
Unturned — port forwarding rules -------------------------------- 27015-27017 UDP -> <server local IP>
Check whether it worked
Test from outside your own network. Connecting from a machine in the house proves nothing — that traffic never leaves the LAN and never touches the rule you just wrote.
What usually goes wrong
Forwarding just the configured port is the standard mistake, and it produces a server that never quite finishes connecting. The block is also why running two Unturned servers on one machine needs their ports at least three apart; setting them one apart makes them silently collide.
Not forwarding at all
Unturned is undemanding enough to run on almost anything, so people usually host at home successfully and then hit the availability problem instead — the server exists only while one particular computer is switched on.